Hello,
J'ai reçu l'alerte Munin suivante sur une machine à propos d'un disque : WARNINGs: smartctl_exit_status is 31.45 (outside range [:1]).
Voici le retour d'un smartctl -a sur le disque concerné :
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST32000641AS
Serial Number: 9WM7EAS0
Firmware Version: CC13
User Capacity: 2 000 398 934 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Thu Jul 26 21:06:17 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 184419202
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 84
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 217773454
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6241
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 84
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 047 045 045 Old_age Always In_the_past 53 (Lifetime Min/Max 43/55)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 83
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 84
194 Temperature_Celsius 0x0022 053 055 000 Old_age Always - 53 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 046 028 000 Old_age Always - 184419202
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 232684148234576
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 891370414
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2513797991
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6220 -
# 2 Short offline Completed without error 00% 6196 -
# 3 Short offline Completed without error 00% 6172 -
# 4 Short offline Completed without error 00% 6148 -
# 5 Extended offline Completed without error 00% 6133 -
# 6 Short offline Completed without error 00% 6100 -
# 7 Short offline Completed without error 00% 6076 -
# 8 Short offline Completed without error 00% 6052 -
# 9 Short offline Completed without error 00% 6028 -
#10 Short offline Completed without error 00% 6004 -
#11 Short offline Completed without error 00% 5980 -
#12 Extended offline Completed without error 00% 5964 -
#13 Short offline Completed without error 00% 5932 -
#14 Short offline Completed without error 00% 5908 -
#15 Short offline Completed without error 00% 5884 -
#16 Short offline Completed without error 00% 5860 -
#17 Short offline Completed without error 00% 5836 -
#18 Short offline Completed without error 00% 5812 -
#19 Extended offline Completed without error 00% 5796 -
#20 Short offline Completed without error 00% 5764 -
#21 Short offline Completed without error 00% 5740 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
A priori je ne vois rien d'alarmant (je ne suis pas un spécialiste non plus !), vous confirmez ?
Merci
